AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Old nutone intercom system lens1/5/2024 See our detailed blog post for more instructions on converting an old intercom box to a modern doorbell.īefore and After broken doorbell update to Ring - submitted by customer. Now that you know the outside dimensions of your box, the spacing between the screw holes, and which type of cutout you need, you can locate a plate to fit your box here. The face of the unit will not be recessed to sit flush with your home's exterior, but will sit on top of our cover plate. Drilling is still required to mount the unit's bracket to the plate. The opening is large enough to accommodate the portion of the unit that sits back into the box. Get one with a large center opening ONLY if you are installing a bulky video doorbell that has a back part that recesses into the wall (such as the Ring Elite). large rectangle cutout (for recessed video doorbells only).round center cutout (for connecting wires to new doorbell).blank (screw holes only for covering box or adding wireless doorbell).Next, determine which type of cutout you need the plate to have. We do NOT recommend using a cloth tape measure when accuracy is required: they stretch and are not designed for precision. ![]() Thick or curved tape measures should be turned so the edge is against the surface. MEASURING TIP: Measure using a hard, flat ruler for the greatest accuracy. ![]() Measure from the very center of one screw hole to the very center of the opposite screw hole. ![]() The holes may be at the top and bottom, or centered on the left and right sides. This is where your new blank intercom cover will be screwed into the box. Next, locate the screw holes that held the old cover in place.
0 Comments
Read More
Leave a Reply. |